Ultrans mobile crane lifting a tank at a plant

Telescopic Mobile Crane

Liebherr LTM1200-5.1

Telescopic mobile cranes travel on their own axles and set up quickly on site. They are used for plant maintenance, machinery installation, wind turbine maintenance and as assist cranes for crawler lifts.

Maximum load capacity: 200 t
Maximum hook height: 88.0 m
Maximum radius: 78.0 m
Main boom length: 13.2 - 72.0 m

Equipment

Use and Selection

Liebherr LTM1200-5.1 is a 200-tonne telescopic mobile crane. It sets up quickly and travels between sites on its own axles.

The Liebherr LTM1200-5.1 is a 200-tonne telescopic mobile crane that joined the fleet with our 2014 crane investment. Its five-axle carrier gets into narrow plant roads and construction sites, and it is used for machinery installation, loading and unloading, and helping to assemble larger cranes.

The choice depends on the load weight and radius, the required boom and lattice jib length, counterweight needs and site access.

Fleet card

1unit in our fleet

Manufacturer: Liebherr
Model: LTM1200-5.1
Type: Telescopic Mobile Crane
Production year: 2014

Technical Specifications

Values from the Ultrans equipment record. Maximum figures depend on boom, jib and counterweight configuration; usable capacity is set per job from the load chart.

Maximum load capacity: 200 t
Maximum hook height: 88.0 m
Maximum radius: 78.0 m
Main boom length: 13.2 - 72.0 m
Jib length (by jib type): 5.4 - 22.0 m
Drive engine power: 370 kW
Number of axles: 5
Crane engine power: 145 kW
Driving speed: 85.0 km/h
Counterweight: 72.00 t

For telescopic mobile cranes the maximum capacity applies with full counterweight at the shortest radius. As the boom extends, the radius grows or the outriggers cannot be fully deployed, the load the crane can take falls quickly, so the right crane is chosen for the geometry of the lift and the site, not the weight alone.

Applications