Crawler Crane

Liebherr LR1600/2

Crawler cranes are used for heavy lifts that need high capacity and a long boom. Because they need a large, prepared set-up area, ground bearing capacity is part of the lift plan.

Maximum load capacity: 600 t
Maximum hook height: 181.0 m
Maximum radius: 126.0 m
Main boom length: 24.0 - 144.0 m

Equipment

Use and Selection

Liebherr LR1600/2 is a 600-tonne crawler crane used for heavy lifts such as refinery, steel plant and wind turbine installation.

The Liebherr LR1600/2 is our 600-tonne crawler crane. On the lifting phase at the İsdemir air separation unit the main lifts were planned with it, and steel plant work, where long, heavy pieces are lifted by a main and an assist crane together, is typical of how it is used.

Beyond the load weight, the working radius, lifting height, boom configuration, ground bearing capacity and set-up area decide the choice.

Fleet card

1unit in our fleet

Manufacturer: Liebherr
Model: LR1600/2
Type: Crawler Crane
Production year: 2013

Technical Specifications

Values from the Ultrans equipment record. Maximum figures depend on boom, jib and counterweight configuration; usable capacity is set per job from the load chart.

Maximum load capacity: 600 t
Maximum hook height: 181.0 m
Maximum radius: 126.0 m
Main boom length: 24.0 - 144.0 m
Maximum load torque: 8,690 tm
Jib length (by jib type): 12.0 - 96.0 m
Derrick boom length: 30.0 - 36.0 m
Central ballast: 65 t
Counterweight: 190 t
Derrick ballast: 350 t
Engine power: 400 kW

The maximum capacity shown is what the crane reaches in its best boom and ballast configuration at short radius. On a real lift the usable capacity can be much lower depending on radius, boom length, ballast and ground; every job is assessed separately against the load chart and a lift plan.

Applications